Kvaser USBcan Pro 2xHS v2
The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.
ROS driver available
Fully supported by your AStuff team
Features
- Supports CAN FD
- Quick and easy plug-and-play installation
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
- Power is taken from the USB bus
- Galvanic isolation
- High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s
- Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
- Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC
- Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware
- Simultaneous operation of multiple devices
Specifications
| Bitrate | 50-1,000 kbps |
|---|---|
| Buffers | On Board Buffer |
| Categories | PC INTERFACES, Interfaces |
| Certificates | CE, RoHS |
| Channels | 2 |
| Connectors | DSUB 9 |
| Current Consumption | 500 mA |
| Error Counters Reading | Yes |
| Error Frame Generation | Yes |
| Galvanic Isolation | Yes |
| Height | 25 mm |
| Interfaces | USB |
| Length | 170 mm |
| Material | PA66 |
|---|---|
| Messages Per Second Receive | 20,000 mps |
| Messages Per Second Sending | 20,000 mps |
| OS |
|
| Silent Mode | Yes |
| Sound | No |
| Temp Range | -40 – 85 °C |
| Timestamp R (μ) | 1 μs |
| Weight | 150 g |
Media
