CSS Electronics CANLOGGER3000
The CANLogger3000 is a simple-to-use, configurable & powerful stand-alone CAN-bus data logger with a rich feature set, a real-time clock and WiFi.
COMING SOON
Features
- Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID)
- Generic design compatible across protocols
- Plug-and-play installation with bit-rate auto-detection support
- Compact design suitable for stand-alone logging
- Firmware upgradeable
- Extensive configuration possibilities
- Advanced message filtering capabilities
- Configurable cyclic logging mode
- Status heart-beat signal
- Run-time control signal
- Transmit up to 20 custom CAN messages (for use in e.g. logging OBD-II)
- Serial interface to allow real-time CAN-bus monitoring (incl. Wireshark integration via CANvas)
Software
- Free configuration and conversion tool (CANvas)
- Free firmware updates
- USB drivers
Specifications
General
Functionality | Data logger and real-time CAN interface |
---|---|
LEDs | Logger status via three externally visible LEDs |
Firmware | Supports free firmware updates for adding features |
Software | Free CANvas software for configuration, streaming & conversion |
Safety | CE, FCC, IC, RoHS certified |
CAN Bus
Standard | Compliant with physical layer standard ISO 11898-2 |
---|---|
Identifiers | Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID) |
Bit Rate | Bit rates up to 1 Mbps (manually configured or automatically detected) |
Bit-rate auto-detection | Yes |
Protocol Support | Protocol independent (i.e. able to log J1939, CANopen, OBD2, …) |
Filters | Advanced message filtering on four configurable channels |
Silent Mode | Yes (does not affect CAN-bus transmission) |
Fail-Safes | The device does not terminate the CAN-bus internally |
Data Logging
SD Card | 16 GB SD card (not replaceable in CL3000) |
---|---|
Real-Time Clock | Yes (CAN messages are time-stamped with 1ms resolution) |
Control Signal | Logging state (enabled/disabled) can be changed run-time using a CAN-bus control message |
Heartbeat Signal | Supports heartbeat signal to periodically indicate logger status |
Cyclic Logging | Supports cyclic logging mode (oldest log file is deleted when file system is full) |
Down Sampling | Channel specific message down-sampling to reduce frequency of logged messages |
Transmit | Transmit up to 20 customized CAN bus messages (e.g. for OBD2 queries) |
File System | Standard FAT file system |
WIFI
Modes | Access Point (AP) and Station (STA) |
---|---|
Transfer Modes | Pull, Push |
Wireless Transfer Speed | Up to ~70 Mbps (~9 MB/s) |
LAN Standard | 802.11 b/g/n |
Security | WEP, WPA, WPA2 and customizable password |
Antenna | Internal |
Supply
Power via CAN-bus | Power can be supplied from CAN-bus or from the USB |
---|---|
Via CAN bus | Power supplied by the CAN bus (+7.0V to +36V DC) |
Protection |
|
Power via USB | Power supplied by USB (+5.0V DC) |
Consumption | The logger’s power consumption is approximately 1 W |
Mechanical
Enclosure | Robust, small enclosure |
---|---|
Dimensions | 66.7 × 42.7 × 23.5 mm (L × W × H) |
Weight | 45 grams |
Connector | Standard D-sub 9 (DB9) connector (OBD2, J1939 adaptor optional) |
Temperature | Operating temperature: -20°C to +80°C |
Real-Time Clock |
|
IP Rating | IP Rating 30 |